How to Use Star 10 Paint Stripper & Videos
Star 10 Paste and Liquid are incredibly easy to use to remove paint, varnish, and other finishes. You do not have to be an expert to use our products, but it is the choice of many experts!
How to use "Phase 1 Paste":
Apply so it goes on about 1/16 of an inch thick.
Apply as if you were putting frosting on a cake.
Dwell Time: this depends on the type of paint you are removing and how many layers of paint you are removing. Please refer to the brochure for your type of application on our brochure page for detailed information.
Star 10 Phase 1 Paste:
...will not soften wood grain
...will work as low as 32 degrees F
...will not freeze
...has a 10 year shelf life
How to use "Phase 2 Liquid":
Apply Star 10 Phase 2 Liquid with a trigger spray bottle, massage with a maroon scotch-brite pad and then wipe with a rag (use it in this method to remove the last bit of residue rather than sanding). Please refer to the brochure for your type of application on our brochure page for detailed information.
Star 10 Phase 2 Liquid:
...can be used in a FLOW-OVER-SYSTEM.
...can be used in a soaking bucket (for items such as door pulls, hinges, window locks and floor registers
...can be used in a dip tank.
Star 10 Demonstration Videos
A picture is worth a thousand words. Check out our videos to see how our product really works!