Use this stripping pad with our "Phase 2 Liquid" to get that last bit of residue off that is always on the surface after removing the bulk of the paint on the first go-around. Using this pad you will want to think of three things: 1. Our applicator bottle (to apply our Phase 2 Liquid Stripper). 2. This strip pad. 3. A rag (to wipe the surface). So only do an area about one square foot. You will have about two minutes to work with this one square foot before the "Phase 2 Liquid" stripper evaporates. With the trigger spray applicator bottle filled with our "Phase 2 Liquid" stripper, get the surface wet and at the same time start massaging that surface area with the Strip Pad. This technique loosens that last bit of residue and is absorbed up into the rag as you wipe that surface.