In our creation of Star 10 Phase 1 Paste stripper, we have added a new ingredient that forms a tight seal and keeps the stripper wet for hours. It shows evaporation and locks in most of the odors of the stripper. It causes the stripper to thicken and stay where you put it, vertically and/or overhead. When applied 1/16th inch thick, Star 10's Phase 1 Paste will take off all the layers in a single application (depending on the type of coating - 1 to 20 coats) Star 10's Phase 1 Paste excels as the toughest jobs, inside and outside, including: multiple layers of paint (lead, latex, enamel) polyurethane, two component epoxy's, two component polyurethane's, stains, varnishes, lacquers, shellac, anti-fouling bottom paint for boats. It is fast ( in most cases it is ready in one hour or less), easy to use and reports back from customers say it works just like the advertising says it does. Our customers say they are very happy with our customer service.
 

Our Star 10 Phaze 2 Liquid is used as a second step after using Star 10 Phase 1 Paste which removes the bulk of the old finish. The Phase 2 Liquid is also used by furniture refinishers in their flow-over tanks and it has been passed on to me that one such refinisher stripped 29 barrel back charis in one eight hour shift by one person. The main feature of the Phase 2 Liquid is that is easily removes the final residue without damaging the patina or harming the wood in any way. Our Phase 2 Liquid saves you a lot of time from sanding and gets your wood very clean.
 

We have assembled this starter kit for you to purchase for doing some test areas on any of your projects. It will do about ten square feet of painted surface and close to 20 square feet of varnished surfaces. All paint removes differently and with different dwell times. You will find that by doing some testing before going fast and furious, you will save time, effort, money and enjoy much satisfaction. You can also observe how much you have used out of the quart can while doing your test and then calculate how much more you will need to complete your project. Also, observe the surface for any damage such as vinyl and other surfaces.
 

Our Star 10 Aerosol is widely used when you have a lot of hand carvings and anything with recesses. It allows to apply an even coat of stripper without getting a whole bunch of runs.